Page 18 - Bendix Air disc brake-01
P. 18
5.3.1 Brake Wear Check using Guide Pin (For all Axial and Radial Disc Brakes except those listed in
Section 5.3.2 - These Callipers do not have the rib in position B (see also Section 5.3.2)
1 1
4 4
6 6
B
C
D
M+P-KN-005
Pad conditions can be visually inspected without B = without rib (see also Section 5.3.2)
removing the road wheel by noting the positon C = pin protrusion - shown in new condition
of the Floating Pin (4) in the Caliper (1). D = minimal pin protrusion - Pads and Rotor must be
checked with road wheel removed
If dimension ‘C’ is less than 0.04in. (1mm), a more
accurate check of the Pads and Disc must be
completed.
If necessary change the Pads - see Section 6
18
SD-23-7550: 000: US: Released: Wed Apr 09 01:32:27 CEST 2014:
