Page 19 - Bendix Air disc brake-01
P. 19
5.3.2 Brake Wear Check using Guide Pin (Only for Axial Disc Brakes SB 7541, SB 7551 to SB 7629,
SB 7639 and Radial Disc Brakes SB 7102, SB 7112, SB 7103, SB 7113, SB 7104, SB 7114,
SB 7105, SB 7115, SB 7108, SB7118, SB 7109, SB 7119, SB 7120, SB 7130 - These Callipers do
have the rib in position B (see also Section 5.3.1)
1 1
4 4
6 6
B
C
D
M+P-KN-006
Pad conditions can be visually inspected without B = with rib (see also Section 5.3.1)
removing the road wheel by noting the positon C = new condition
of the Floating Pin (4) in the Caliper (1). D = 0.64in. (18mm) or more, Pads and Rotor must be
checked with road wheel removed
If the head of the Floating Pin (4) is inside the
Rubber Bush (6) by a dimension D greater than
0.64in. (18mm), then a more accurate check of the
Pads and Rotor must be made.
If necessary, change the Pads - see Section 6.
19
SD-23-7550: 000: US: Released: Wed Apr 09 01:32:27 CEST 2014:
