Page 27 - Bendix Air disc brake-01
P. 27
8 Caliper Suspension sealing
(Replacement of inner Boot (9) )
(for the Axial and Radial Disc Brake)
Remove Caliper (see Section 10.1)
Remove Ring (58)
Pull out Sleeve (5)
5
Push out Boot (9) with screw driver. 58
9
Inspect and clean contact area of Boot (9)
M+P-KN-025
Put new Boot (9) into the Cup (arrow) of the Tool C
(Order No II19253). 9 9
C
Position Sleeve with Boot (9) into the Caliper bore
and pull in.
M+P-KN-026
Fit the Sleeve (5)
The Boot end must engage in the groove of the
Sleeve (5) (arrow). Lock with Ring (58) by pushing
on until it engages.
58
Important:
Before fitting the Caliper, the unsealed Sleeve with the 5 9 VF 00127/15
Rubber Bushing should be checked for its ability to
slide.
Fit Caliper (see Section 10.2).
27
SD-23-7550: 000: US: Released: Wed Apr 09 01:32:27 CEST 2014:
