Page 30 - Bendix Air disc brake-01

WARNING!

Hold the Caliper only on the exterior.
Never insert your fingers between
the Caliper and Carrier!

Remove Caliper from Carrier.

IMPORTANT!
Opening or dismantling the Caliper is not
permitted. Use only Genuine Bendix
service Exchange Calipers. Disassembly
of the Caliper will void any FD00114
Warranty Claim.

10.2 Caliper fitting

Check the Part No. on the label (arrow, Figure above
right) to ensure that you have selected the proper
replacement Caliper.

Note:
Service Exchange Calipers have a blue label.

The Service Exchange Caliper has a plastic cap or an
adhesive tape in the area of the Actuator attachment.
Remove the cap or tape after installing the Caliper
(see arrow). FD00116

Note:
The service exchange Caliper includes sealing and
guiding elements. The Pads are not included.

WARNING! 39 10a 31a

Hold the Caliper only on the exterior. 31
Never insert your fingers between
the Caliper and Carrier!
40
10.2.1 Caliper with Rubber Boot (10) 10

Locate the Caliper to the Carrier. FD00113

Screw-in Caliper Bolts (39 and 40) and tighten to
+18 +25
210 ft. lbs. (285 Nm) (use only new parts).

Check that the Caliper slides easily.
Check the position of the Inner Boot (9) on the
Sleeve (5). 9

Check Adjuster function (see Section 5.2)

If necessary, use a new Rubber Boot (10).

Ensure grease-free seating of the Rubber Boot (10)
on the Caliper (1) 5
58 M+P-KN-027

30
SD-23-7550: 000: US: Released: Wed Apr 09 01:32:27 CEST 2014: