Page 29 - KNORR Pneumatic Disc Brake
P. 29
6
Brake Pad Replacement
6.3.2. Insert the brake pads (12) with pre-assembled wear
indicators into their respective brake pad bay area (see Fig.). 12
Note: See also section 6.2.2.
6.3.2 - Insert pre-assembled pads
6.3.3. Fit pad retainer (11) with retainer pin (44), washer
(45) and spring clip (26) (see Fig. and Section 6.2). Note
the correct position of the cables (101) (see arrows). 44 11
26
45 101
6.3.3 - Fit pad retainer
Fitting of Cable Guide Variant (105)
6.3.4. Fit the cable guide variant (105) onto the pad 105
retainer (11). When correctly positioned, and whilst applying
light pressure, the cable guide (105) will lock easily into
place (see Fig.).
6.3.4 - Fitting cable guide
29
