Page 57 - BPW axles with air suspension Series O SL AL
P. 57
Two-sided lift for welded hanger brackets 13.2
The two-sided axle lift is mounted below both the
air suspension hanger brackets on each module and
is therefore located within the suspension clearance.
This means it does not interfere with the vehicle
equipment such as pallet boxes.
The lift is supplied in a version for 9 - 10 t axle
load and another version for up to 12 t axle load.
As well as the version for rigid and adjustable air
suspension hanger brackets, variants for BPW
channel cross members and aluminium hanger
brackets are also available.
F Fuunnccttiioonn::
In this axle lift, the lifting force is generated by an
integrated diaphragm cylinder on each side.
The pivot point for the entire structure is the spring
bolt fitted on all BPW air suspension units, so that
no installation preparations have to be made by the
A Addvvaannttaaggeess:: vehicle builder apart from the air installation. Retro-
fitting is also possible without difficulty.
• Can be used with disc or drum brake axles
• The installation space in front of the air sus-
pension hanger brackets and in the middle of
the vehicle remains clear
• Retrofitting possible without difficulty R Reemmaarrkkss::
• Compact design, good ground clearance
• Low weight of approx. 30 kg per axle The installation position and mounting of the axle lift
• Installation position can be set for different device can be seen in the BPW technical docu-
ments and the supplied installation drawing.
suspension types
The position for setting out the stop is shown in the
• Robust design BPW technical documents!
• Durable technology because proven brake
components are used
BPW-EA-Luft 1023701e 57
