Page 58 - BPW axles with air suspension Series O SL AL
P. 58
BPW axles with air suspension
13.3 Two-sided lift for bolted hanger brackets
The two-sided lift for bolted hanger brackets is
suitable for both disc brake axles and drum brake
axles.
The design is such that the spring bolt is not requir-
ed for the function of the axle lift. This means the-
re is no need to remove the spring bolt when in-
stalling the axle lift, as would otherwise be
necessary. As a result, installation is much more
straightforward.
The two-sided axle lift is mounted below both air
suspension hanger brackets on each module and is
therefore located within the suspension clearance.
This means it does not interfere with the vehicle
equipment such as pallet boxes.
F Fuunnccttiioonn::
In this axle lift, the lifting force is also generated by
one integrated diaphragm cylinder on each side.
The holder is hooked onto the rear end of the han-
A Addvvaannttaaggeess:: ger bracket (punched opening) and bolted onto the
front end with two bolts. The lever for the lifting
• Can be used with disc and drum brake axles stroke is mounted on the holder. This means there
• The installation space in front of the air is no need to remove the spring bolt.
suspension hanger brackets and in the
middle of the vehicle remains clear
• Can easily be mounted on the hanger bracket R Reemmaarrkkss::
(2 bolts) without removing the spring bolt
• No additional spring bolt assembly required The installation position and mounting of the axle lift
• Compact design, good ground clearance device can be seen in the BPW technical docu-
• Low weight of approx. 32 kg per axle (approx. ments and the supplied installation drawing.
16 kg per lift) The position for setting out the stop is shown in the
BPW technical documents!
• Installation position can be set for different
suspension types
• Robust construction
• Durable technology because proven brake
components are used
58 BPW-EA-Luft 1023701e
